Adjust your speed while it's engaged for incremental speed adjustments You retain 100% throttle control whether engaged or disengaged Simple Bolt-On Installation made of Stainless Steel
The ATLAS Throttle Lock is made of hardened stainless steel and will last the life of your motorcycle. These high quality materials allow us to laser cut extremely thin parts while maintaining strength and resilience.
Features:
- Rotates with the throttle for an ergonomic position at all times
- The low profile design stays out of the way and doesn't take up any grip space
- Maintain a constant speed while engaging & disengaging
- Universal fit so you don't have to sell it with your motorcycle
- Quick and Easy Installation doesn't require removing anything
Simple Installation:
Leave the grips, bar ends, handguards and Dremel alone! The ATLAS Throttle Lock bolts on to your throttle tube with minimal effort. The intelligent ratcheting mechanism will clamp the ATLAS to any throttle tube diameter, from 7/8” to 1-1/4”.
Top Kit vs. Bottom Kit:
The ATLAS Throttle Lock comes in 2 different configurations. A Top Kit and a Bottom Kit. Most riders will be using the Bottom Kit, but some will need the Top Kit.
The Top Kit was designed for motorcycles with certain interferences.
- Throttles with heated grip wires on the lower half of the grip
- Right-hand turn signals on the throttle housing
- If there is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn.
The Bottom Kit will work best with the majority of motorcycle on the road.
- Works with throttles that have a heated grip wire that runs out the top half of the throttle grip flange.
**Demo models have cosmetic damage from being previously installed. Email Support@UnionGarageNYC.com if you have any questions**
Adjust your speed while it's engaged for incremental speed adjustments You retain 100% throttle control whether engaged or disengaged Simple Bolt-On Installation made of Stainless Steel
The ATLAS Throttle Lock is made of hardened stainless steel and will last the life of your motorcycle. These high quality materials allow us to laser cut extremely thin parts while maintaining strength and resilience.
Features:
- Rotates with the throttle for an ergonomic position at all times
- The low profile design stays out of the way and doesn't take up any grip space
- Maintain a constant speed while engaging & disengaging
- Universal fit so you don't have to sell it with your motorcycle
- Quick and Easy Installation doesn't require removing anything
Simple Installation:
Leave the grips, bar ends, handguards and Dremel alone! The ATLAS Throttle Lock bolts on to your throttle tube with minimal effort. The intelligent ratcheting mechanism will clamp the ATLAS to any throttle tube diameter, from 7/8” to 1-1/4”.
Top Kit vs. Bottom Kit:
The ATLAS Throttle Lock comes in 2 different configurations. A Top Kit and a Bottom Kit. Most riders will be using the Bottom Kit, but some will need the Top Kit.
The Top Kit was designed for motorcycles with certain interferences.
- Throttles with heated grip wires on the lower half of the grip
- Right-hand turn signals on the throttle housing
- If there is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn.
The Bottom Kit will work best with the majority of motorcycle on the road.
- Works with throttles that have a heated grip wire that runs out the top half of the throttle grip flange.
**Demo models have cosmetic damage from being previously installed. Email Support@UnionGarageNYC.com if you have any questions**
