After a couple seasons of seeing customers come through with this superbright LED helmet light, we're happy to finally add them to our catalog.
Brake Free works by using onboard sensors (accelerometer and gyrometer) and a patented algorithm to automatically activate a panel of 100 super-bright LEDs.
So even if you never touch your brake lever or pedal, if you down shift, or make any other sudden moves, the brake light automatically activates.
It sounds complex—and it is—but the user experience couldn't be simpler.
Just hit the single button to activate the device, use the same, single button to toggle through the 3 riding modes, and the rest is all automatic.
- Mode 1 – Standard / Active Mode: All LED panels are fully lit as running lights.
- Mode 2 – Pulsing Mode: The left and right LED panels pulse for extra attention (requires the battery to be more than 25% charged).
-
Mode 3 – Stealth Mode: Only the center top and bottom LED panels stay on as running lights to save battery.
(Note: In all three running modes, braking or decelerating will automatically trigger all LED panels to blast at 100% brightness).
The device is totally autonomous, and works on any bike, and with just about any helmet.
*Shoei RF-1400 users -- due to the architecture of the back of this helmet, you'll need a special adapter to get a clean install.
Tech Specs:
- Battery info: 3350 mAh 18650 Li-Ion Cell
- Riding time: 8-12 hours depending on riding condition and light mode
- Operating temperature range: -40°C to 60°C (-40°F to 140°F)
- Charging temperature range: 0°C to 45°C (32°F - 113°F)
- Charging Port: USB-C
- Charging Rate: 1.6 Amp Max
- Lights: 100 LEDs; 120° viewing angle
- Weight: 200 grams
- Dimensions: 184mm wide, 84mm tall, 30-40mm thick
- Water resistance: IP65
- Mount Adhesive: high-performance 3M VHB double-sided adhesive
COMES WITH:
- 3 ft USB-C to USB-C CHARGING Cable
- Two Mounts: Universal & XL
- Quick Start Guide, Installation Template, & Alcohol Wipe
After a couple seasons of seeing customers come through with this superbright LED helmet light, we're happy to finally add them to our catalog.
Brake Free works by using onboard sensors (accelerometer and gyrometer) and a patented algorithm to automatically activate a panel of 100 super-bright LEDs.
So even if you never touch your brake lever or pedal, if you down shift, or make any other sudden moves, the brake light automatically activates.
It sounds complex—and it is—but the user experience couldn't be simpler.
Just hit the single button to activate the device, use the same, single button to toggle through the 3 riding modes, and the rest is all automatic.
- Mode 1 – Standard / Active Mode: All LED panels are fully lit as running lights.
- Mode 2 – Pulsing Mode: The left and right LED panels pulse for extra attention (requires the battery to be more than 25% charged).
-
Mode 3 – Stealth Mode: Only the center top and bottom LED panels stay on as running lights to save battery.
(Note: In all three running modes, braking or decelerating will automatically trigger all LED panels to blast at 100% brightness).
The device is totally autonomous, and works on any bike, and with just about any helmet.
*Shoei RF-1400 users -- due to the architecture of the back of this helmet, you'll need a special adapter to get a clean install.
Tech Specs:
- Battery info: 3350 mAh 18650 Li-Ion Cell
- Riding time: 8-12 hours depending on riding condition and light mode
- Operating temperature range: -40°C to 60°C (-40°F to 140°F)
- Charging temperature range: 0°C to 45°C (32°F - 113°F)
- Charging Port: USB-C
- Charging Rate: 1.6 Amp Max
- Lights: 100 LEDs; 120° viewing angle
- Weight: 200 grams
- Dimensions: 184mm wide, 84mm tall, 30-40mm thick
- Water resistance: IP65
- Mount Adhesive: high-performance 3M VHB double-sided adhesive
COMES WITH:
- 3 ft USB-C to USB-C CHARGING Cable
- Two Mounts: Universal & XL
- Quick Start Guide, Installation Template, & Alcohol Wipe

