Gerbing's heated motorcycle jacket liner uses patented stainless steel MicroWire heating pads with thermostats for even heat distribution and safety. Like its other MicroWire products this jacket liner will heat up to a very specific 135 degrees Fahrenheit—plenty to keep you warm, comfortable and in control.
This jacket liner is the perfect addition for any rider wanting complete comfort, regardless of the temperature. Built on a durable, wind-resistant nylon chassis, this liner comes with seven individual Microwire-powered heat zones; collar (1), chest (2), sleeves (2), and back (2).
It is designed to be worn close to the body, under your outer jacket and over a thin polyester base layer. This configuration will provide the fastest and warmest heat transfer. The Microwire-powered heat zones come to full temperature in seconds. The liner also serves as "home base" for glove, pant, and sock connections.
If you’re also going to be using Gerbing heated gloves, this jacket liner features convenient cords concealed in zippered pockets at each wrist.
Note: While you can technically plug this product directly into the battery with the included wiring harness, it is highly advisable you use a single- or dual-zone controller to modulate temperature. The goal with heated gear is to remain “temperature neutral”—not too hot, not too cold, but juuuuust right. And being able to adjust heat with the turn of a dial helps achieve that objective.
Unless you’ll only be using one product (Jacket Liner + Gloves tends to be the most popular option) we also strongly suggest getting the dual-temp controller so that you have the option to adjust different articles of clothing as needed.
> Heating pads on the chest, back, collar, and sleeves
> Windproof elastic cotton ribbing at waist and cuffs
> YKK Zippers
> Thermal resistors installed on each individual heading pad eliminate hot spots
> Battery harness included
> Max Heat: 135 F @ 77W
> Power: 12V DC 6.4 Amp
> Materials: Minirip shell, taffeta lining
> MADE IN THE USA